<p>Before reading this page, we strongly suggest a look at <a href="https://www.techpowerup.com/articles/overclocking/psu/160" target="_blank" rel="nofollow noopener noreferrer">this</a> article, which will help you understand the internal components of a PSU much better. Our main tool for the disassembly of the PSU is a Thermaltronics <a href="http://www.thermaltronics.com/tmt-9000s.php" target="_blank" rel="nofollow noopener noreferrer">TMT-9000S</a> soldering and rework station. It is of extreme quality and is equipped with a matching <a href="http://www.thermaltronics.com/m_desolder_gun.php" target="_blank" rel="nofollow noopener noreferrer">de-soldering gun</a>. With such equipment in hand, breaking apart every PSU is like a walk in the park!<br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_top1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_top1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_top2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_top2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_top3.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_top3_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_top4.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_top4_small.jpg" alt="" /></a><br />Like every other HCP unit, this one too is made by Delta, the largest and probably best PSU OEM. The only problem with Delta's implementations is that they are very expensive because their units only use topnotch components, and the best production lines in the industry also don't come cheap, nor are they cheap to maintain. <br /><br />The HCP-1300 uses a full-bridge topology and an LLC converter for loss-less switching of the primary mosfets. The secondary side uses a synchronous rectification scheme with a specially designed transformer that actually hosts the +12V fets for reduced energy losses; the DC-DC converters are installed directly on the modular PCB for the same reason. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_transienta1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_transienta1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_transienta2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_transienta2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_transientb.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_transientb_small.jpg" alt="" /></a><br />The first part of the transient filtering stage is located right behind the AC receptacle and consists of one X and two Y caps. We find the remaining transient filtering components, one X and four Y caps, two CM chokes, and an MOV, on the main PCB. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_bridges.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_bridges_small.jpg" alt="" /></a><br />The two parallel bridge rectifiers are cooled by a dedicated heatsink. Their model number is <a href="http://www.shindengen.co.jp/product_e/semi/list_detail_NEW.php?category_id=01&sub_id=03&product_id=LL25XB60" target="_blank" rel="nofollow noopener noreferrer">LL25XB60</a> and they can, combined, handle up to 50 A of current. The PFC input cap is in front of the rectifier bridges.<br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_APFC_side.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_APFC_side_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_APFC_fets_diode.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_APFC_fets_diode_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_APFC_cap1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_APFC_cap1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_APFC_caps2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_APFC_caps2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_APFC_PCB.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_APFC_PCB_small.jpg" alt="" /></a><br />Three Infineon <a href="http://www.infineon.com/dgdl/IPA60R125CP_rev2.1.pdf?folderId=db3a304412b407950112b408e8c90004&fileId=db3a304412b407950112b42e043b4939" target="_blank" rel="nofollow noopener noreferrer">IPA60R125CP</a> fets and a <a href="http://www.cree.com/products/pdf/C3D10060G.pdf" target="_blank" rel="nofollow noopener noreferrer">CREE C3D10060</a> boost diode are used in the APFC converter. The two huge parallel caps are provided by Rubycon (450V, 560µF each or 1120µF combined, 105°C, MXG series), and the PFC controller is mounted to a small PCB residing on the edge of the main PCB. It is a <a href="http://www.championmicro.com.tw/product-en/CM6502S.htm" target="_blank" rel="nofollow noopener noreferrer">Champion CM6502S</a> IC its maker says to meet 90+ efficiency. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_primary_heatsinks.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_primary_heatsinks_small.jpg" alt="" /></a><br />These heatsinks are attached to a couple resistors that are most likely used for current sense purposes. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_thermistor_relay.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_thermistor_relay_small.jpg" alt="" /></a><br />This thermistor is for large inrush current protection. Next to it resides a relay that cuts it off the circuit once the startup phase is complete.<br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_TNY280PG.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_TNY280PG_small.jpg" alt="" /></a><br />The standby PWM controller is a <a href="http://www.powerint.com/sites/default/files/product-docs/tny274-280.pdf" target="_blank" rel="nofollow noopener noreferrer">TNY280PG</a> IC.<br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_switchers1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_switchers1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_switchers2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_switchers2_small.jpg" alt="" /></a><br />The four main switchers are arranged into a full bridge topology, and an LLC resonant converter here provides zero voltage switching to drastically decrease energy losses. The heatsink that cools down these fets is fairly small because of the low thermal load the switchers and LLC resonant converter produce. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_transformer1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_transformer1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_transformer2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_transformer2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_secondary_caps.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_secondary_caps_small.jpg" alt="" /></a><br />The main transformer is not only incredibly compact and densely populated, it also utilizes a special design that allows the fets that regulate the +12V rail to directly attach to it. This technique provides high efficiency and reduces EMI noise. As you can see in the photos above, a small heatsink is firmly attached to the +12V fets to cool them down. Finally, a great number of solid capacitors and several Nippon Chemi-Con electrolytic caps are used to filter the +12V rail. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_VRMs.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_VRMs_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_VRMs1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_VRMs1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_front_close1a.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_front_close1a_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_front_close1b.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_front_close1b_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_bus_bars2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_bus_bars2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_bus_bars1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_bus_bars1_small.jpg" alt="" /></a><br />Two DC-DC converters that generate the minor rails are located on a PCB right behind the modular one. Several bus bars transfer the required power (+12V) along with ground to this PCB, and two pairs of fets behind it each handle the two minor rails. Two solid capacitors and two large Chemi-Con electrolytics further reduce/filter ripple. This PCB is connected to the modular one via three bus bars located at its very top. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_front.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_front_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_front_close1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_front_close1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_front_close2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_front_close2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_front_close3.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_front_close3_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_lower_sockets.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_lower_sockets_small.jpg" alt="" /></a><br />On the modular PCB, many Chemi-Con electrolytic caps provide some extra ripple filtering to the DC outputs. The bottom sockets are directly soldered to the main PCB to keep wiring to a minimum, which also keeps forward voltage drops at high loads at an all-time low.<br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_modular_PCB_layers.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_modular_PCB_layers_small.jpg" alt="" /></a><br />The modular board consists of three layers. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_secondary_side.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_secondary_side_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_secondary_side_PCB.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_secondary_side_PCB_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_DWA103N.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_DWA103N_small.jpg" alt="" /></a><br />The supervisor IC is located on a vertical PCB in the secondary side. Its model number is DWA103N, and exactly the same one is used in the HCP-1000 and older HCP-1200. An AS339 quad voltage comparator on the solder side of the same PCB also provides a few additional OCP channels. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_PCB.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_PCB_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_PCB_close1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_PCB_close1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_PCB_close2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_PCB_close2_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_PCB_close3.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_PCB_close3_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_PCB_close4.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_PCB_close4_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_main_PCB_close5.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_main_PCB_close5_small.jpg" alt="" /></a><br />Soldering quality on the main PCB is very good; however, we spotted some areas where soldering wasn't up to the typical Delta levels. We also found the LLC resonant controller on this side. It is a <a href="http://www.championmicro.com.tw/datasheet/Analog%20Device/CM6901.pdf" target="_blank" rel="nofollow noopener noreferrer">Champion CM6901X</a> IC. The CM6901 operates in PWM mode at light loads, using FM mode for everything else. <br /><br /><a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_fan1.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_fan1_small.jpg" alt="" /></a> <a href="https://www.techpowerup.com/reviews/Antec/HCP-1300/images/in_fan2.jpg" target="_blank" rel="nofollow noopener noreferrer"><img src="https://tpucdn.com/reviews/Antec/HCP-1300/images/in_fan2_small.jpg" alt="" /></a><br />The cooling fan is made by Delta, since Delta also has a long-standing tradition as a fan manufacturer. The fan's model number is AFB1312M (12V, 0.38A), and it is manufactured in China. The fan's profile stays pretty relaxed at up to about 60% of the maximum-rated-capacity load under normal conditions, but goes all out afterward to keep the unit's internals cool.</p>